Search results

Thanks guys for the clarification about the salt and evap. Not sure where i read that. maybe i made it up in my head. And thanks for the evap article, very helpful. I'll do the bucket test and see what happens. Thanks again, Merry Christmas and Happy New Year!

Thanks for the clarification Marty. And for putting me in the right forum! Does that water loss seem normal? It could be we have had little rain this year, and in years past we had rain.

Hello, Earlier this year I installed a SWCG, which has been a total blessing. With it, obviously, I raised the salt level in my pool. During the summer, it seemed the pool water was evaporating quicker than years past, and i read on here that the higher salt % causes a higher evaporation level...

Your question(s) got me thinking. I really do not use the light much, just at night when anyone is swimming, and that is not every day. The light is quite bright, and at this point I will just put on a dimmer switch and call it a day.

Hello- My pool light went out last week. I took it out and to saw I had a 500 watt incandescent bulb in there. I went to Leslie's to see what options they had, and they did not really have any. So went to PoolZoom, and local pool store here in San Antonio. I bought a PAL light LED, with all the...

I drive right by you all the time! Thanks for that info. One more thing....i just went out to check out the SWG, and the Generate light was off. No other light was on. Pump is running (has flow) I noticed the Sailinity reading said 0000PPM. this is wierd. It is well over 3000. And the low salt...

Thanks Pat. I have two timers over there. of course i used the one that is broken. nothing a little rewiring cant fix! Question again if i can. just trying to zero in on SWG runtime. You have same SWG and similar size pool as mine. I think you are in full sun, and I am partial. How long do you...

i hooked the SWG to my old intermatc timer to control the timing. ends up dang thing does not work. Manual says its ok to use flow valve to control generation. you guys trust it? am i ok leaving SWG on at all times, and let flow valve control generation?

it was well north of 8.2.. tf100 dark red. i did not add any acid all winter.

OK, will do. I measured today and it was ~40. I will add some stabilizer.

OK, so i started her up! i set it at 50% to see how that works. The salinity reading on the unit says 2670. that is a variance of 800. what level are you at?

Thanks Pat. I had to add 2 jugs of MA to get it down. I'll maintain it. Also re-measured salt with the Taylor K-1766. Same as yesterday. 17 drops to get to Salmon! so I am at 3400. You think I should add salt? Book says 3500, or between 3000-4000. Maybe add a bag or two?

I just installed a SWG (Circupool RJ45) I have not started it up yet, as I just took the leaf cover off and getting the salt where it needs to be. I have a few questions. 1) how important is pH level when using a SWG? I always have high pH because of where I am. I maintain it decently well, but...

Thanks for the quick reply. My install will by almost identical to yours. You can see my pic above. I just need to wire it to my Intermatic timer, and make sure it aligns with my pump schedule. I am hoping my current pump schedule will allow for enough chlorine generation. what do you think...

I bought the Circupool RJ-45 yesterday for $1,299. Looking forward to getting it going. Quick questions if I could. I thought you had to add salt to a SWG for it to make chlorine from the salt. (like a water softener) But I guess it takes the salt from the water and converts that? That is why...

Yeah, was thinking about the automation. I do have two Intermatic timers against the wall that I do not use anymore. Used them from previous owner when it had single speed filter and a polaris with booster pump. I could hook it up to one of those.

Thanks Mike. I saw the RJ-30 for $1279, but discountsaltpool.com has an upgrade to RJ-45 for $1299. On attached pic, I assume I can install on the red circle? Also, what else do i need? i have both 110 and 220 electricity right there.

Hello- Just went to Hope Depot to buy some LC and it was $9 a bottle! Wow. I am sure like everyone else they are thinking SWG. Just starting my research on this, and have a question on sizing. For my pool (15k) do i get somehting rated for 20k gallons? i see units costing anywhere from $800 to...

Hi there- long time no post. i don't think I've been on here since COVID! Thinks have been great, except chlorine now costs $4.50 a gallon! I have low CYA. with the TF test, when i fill the tube, can still clearly see the dot. I have added some pucks in the floater to get some stabilizer in...

Thanks Jim. I use hairnets as well, and they do capture a bunch of stuff. I will check how it skims now at 1400 and adjust accordingly. I do not have a SWCG. I add chlorine usually in evening. All good info, and basically will save me $$$ on the run time and also the life of the equipment...

Jim, Marty, thanks for your responses. Honestly when I switched from a single speed to the VS, I just used the default that came with the pump. Can you guys share the schedule you use? I know everyone needs different speeds, times based on there configuration. My goals are the same as...

@ 3000 is ~12 psi. My normal pump schedule is. (default with pump. seems to work well) 2 hours @3000 8 hours @1400 2 hours @2400 Runs @ 3450 first five minutes while priming.

Top speed. 3450.

Good morning- Finally got around to switching out my old sand filter to a new cartridge filter. The Texas freeze cased some issues with my sand one, so I went ahead and bought the Pentair Clean & Clear Plus Cartridge Filter | 420 Sq. Ft. | 160301. Overall was pretty easy. See pic attached. I...

Yeah, you said that originally, makes sense. I see what you are saying, and also about the pipe size. Thanks for the clarification.

Now I am no graphics guy :) , but this is what I was thinking, based on what James said.