Difference between revisions of "Preparing Pool for Cooler Months" - Further Reading

 
(33 intermediate revisions by 3 users not shown)
Line 1: Line 1:
 +
[[Category:Swimming Pool Chemistry]]
 +
 
=Preparing Your Pool for Cooler Months=
 
=Preparing Your Pool for Cooler Months=
 +
 
Some pool owners live in climates where a pool can be left open throughout the year.  Below are tips for what to do when the swimming season is over and the pool becomes a water feature.
 
Some pool owners live in climates where a pool can be left open throughout the year.  Below are tips for what to do when the swimming season is over and the pool becomes a water feature.
  
==Water Chemistry==
+
[[Image:Blur-branch-close-up-cold.jpg]]
*Change nothing except for the amount of bleach/chlorine required because FC consumption slows down dramatically.<ref>https://www.troublefreepool.com/threads/preparing-pool-for-cooler-months.194645/post-1715755</ref>
+
 
*Once the water temp drops to about 65 or so, the SWG will shuts-down
+
==Water Chemistry During Winter Months==
*You'll go manual with occasional bleach/chlorine additions
+
As the weather cools off you will notice that caring for your pool involves less effort than during the warm Summer months. You can continue to care for your pool the same way during these cooler months but realize that the amount of chlorine required to maintain the water will slow dramatically. This is due to the sun angle being much lower and burning off less chlorine than during the hot summer months.
 +
 
 +
If you utilize a Salt Water Generator during the Summer, you will want to switch to [[Liquid Chlorine]] as many SWGs stop generating when the pool water gets between 50°F and 60°F. During this time you should switch to the [[Liquid Chlorine]] targets on the [https://www.troublefreepool.com/blog/2019/01/18/chlorine-cya-chart/ FC/CYA Chart].
 +
 
 +
Lastly, pool owners who have a plaster pool will want to watch their [https://www.troublefreepool.com/blog/2019/01/18/calcium-saturation-index-csi/ Calcium Saturation Index] as CSI decreases as water temperature gets colder. Raise the pool pH to keep CSI above -0.6 to avoid damaging a plaster pools surface through etching.
 +
 
 +
==Equipment Over the Winter==
 +
During the Winter users can minimize their pump run time and only run it to keep their chemicals mixed. If you have trees dropping leaves into your pool you may want to consider some type of [[Skimmer Guards|skimmer leaf guard]]. This will help prevent your skimmer from being clogged and starving your pump of water.
 +
 
 +
Some manufacturers of gas heaters warn that cycling the heaters on and off when the water is less than 70°F can cause damage. Because of this you should be mindful that using your heater to keep pool water above freezing can cause damage. You can read more about this in [[Heater Condensation]]. If you do opt to run your gas heater with water below 70°F it should be done in one cycle to get your water above 70°F. Then keep it above 70°F using the heater if desired.
  
==Pump Run-Time==
+
=Contingency Planning for Freezing Weather=  
*You can minimize pump run time and only run it as needed to keep chemicals mixed
+
As the warm weather starts to give way to cooler temperatures, it's important to be prepared for the possibility of freezing weather, especially if you live in an area that doesn't typically experience freezing temperatures. Freezing weather can be especially dangerous if it's short-lived and unexpected, as it can catch people off guard and leave them unprepared.
*Turn on the pump with really low temp drops and hard freeze nights/mornings
 
*Don't rely on Freeze Protection to turn your pump on. It may fail on you.
 
  
==Skimmer Settings==
+
It's especially important to be prepared for freezing weather when you have a swimming pool. When the temperature drops below freezing, the water in your pool can turn to ice, which can damage the pool's pump and pipes. To avoid this, it's a good idea to take a few minutes now, while the weather is still warm, to learn how to shut down your pool and drain the system. This will help you protect your pool and avoid costly repairs in the event of a freeze.
*Leave the skimmer/drain settings the way you have them as surface skimming is most important
 
  
==Heater==
+
Here are some tips for preparing your pool for freezing weather:
*Heat Pumps will not run below 50F degrees
 
*Corrosive condensation can damage many gas heaters if they are cycled with with water below 70F degrees.  Using your heater to keep pool water above freezing can damage the heater from [[Heater Condensation]]
 
*If you run your gas heater with water below 70 degrees it should be done in one cycle to get your water up above 70F.  Then keep it above 70F using the heater if desired.
 
*Do not plan to use your heater to keep pool water above freezing
 
  
==Covering the Pool==
+
===Keep the water moving===
*Solar covers can be used but you should allow the pool water to breath with the cover removed occasionally
+
Moving water is difficult to freeze, so it's important to keep the water in your pool circulating as much as possible. If your system has freeze protection, make sure it is operating properly. If you're not sure, it's better to turn it off and manually set the system to run 24/7 until the freezing temperatures subside.
*Keep a tarp and plastic cover nearby to cover the equipment pad in case you encounter sleet which will protect the equipment from exposure in harsh weather
 
  
==Equipment Cleaning==
+
===Have a backup plan for power outages===
*Clean the filter so that you do not end up with a clogged filter when the weather is bad
+
Power outages can be a major problem when it comes to freezing weather. To prepare for this possibility, consider the following:
 +
*Know how to drain your equipment quickly if power does not return. Look for drain plugs on your pump pot, filter, and heater (if applicable).
 +
* Wrap exposed plumbing and equipment with insulation materials to protect them from the freeze.
 +
* Place a decent weight painter's tarp (fabric or polymer) or heavy blanket over the equipment pad. Some people might even place one or two contractor/painter lamps with 100W incandescent bulbs in them under the tarp for warmth.
 +
* If you have accessories that you can't keep running (e.g. waterfalls, spill-overs, etc.), consider closing them in advance. If you can access the outlet area of the feature, try to vacuum out some water close to the ground's surface or plumbing exit and add some RV antifreeze to the plumbing at that exit area for insurance.
 +
* Watch for standing water. This can be a problem for waterfalls as the water may slip into cracks and grout areas and then later expand and cause damage. Remove standing water and/or consider covering the area with a tarp if possible.
 +
* Have a couple pieces of cut-up pool noodles or a plastic jug (half full) to place in the skimmer(s) in case power does not return for a long time. Also consider placing a cover over the skimmer lid to prevent it from freezing stuck in place.
 +
* Autofills: Remember that any exposed autofill line will not have water actively moving through it. Water only moves when it's filling the pool. If possible, shut off the autofill line and purge some water from it to prevent expansion in the line. At the very least, be sure to wrap any exposed autofill lines well.
 +
* Heaters: It's best to allow water to run through them, but do not activate the heat mode. Only allow water to continuously flow. As with other equipment, know where your drain plugs are in case power is lost for a significant amount of time.
 +
* Inspect all areas at the equipment pad for leaks. These tiny leaks will be the first to freeze and could be harmful to equipment. Try to resolve them if possible or take extra precautions to protect the area from freezing if possible.
  
==Contingency Planning==
+
By following these tips and being prepared, you can help protect your pool from freezing during unprecedented cold weather.
*Take a few minutes now when the temps are still nice and warm to learn how to shut down everything and drain your system. You don’t really need to do everything, just learn how.<ref>https://www.troublefreepool.com/threads/preparing-pool-for-cooler-months.194645/post-1716638</ref>
 
*A few years ago freak cold spells hit some of the south and left many pool owners without power for a few days. The only way to fully guarantee the pipes wouldn’t freeze was to drain the equipment pad as they couldn’t run their pumps due to no power.
 
*It’s ALOT easier/enjoyable to learn how to do everything when it’s 80° outside than when it’s 30° outside.
 
*Some people will have a spare pump that they can install should their pump fail during a freeze
 
  
 
=The Physics of Freezing and Freeze Protection=
 
=The Physics of Freezing and Freeze Protection=

Latest revision as of 17:28, 18 January 2024


Preparing Your Pool for Cooler Months

Some pool owners live in climates where a pool can be left open throughout the year. Below are tips for what to do when the swimming season is over and the pool becomes a water feature.

Blur-branch-close-up-cold.jpg

Water Chemistry During Winter Months

As the weather cools off you will notice that caring for your pool involves less effort than during the warm Summer months. You can continue to care for your pool the same way during these cooler months but realize that the amount of chlorine required to maintain the water will slow dramatically. This is due to the sun angle being much lower and burning off less chlorine than during the hot summer months.

If you utilize a Salt Water Generator during the Summer, you will want to switch to Liquid Chlorine as many SWGs stop generating when the pool water gets between 50°F and 60°F. During this time you should switch to the Liquid Chlorine targets on the FC/CYA Chart.

Lastly, pool owners who have a plaster pool will want to watch their Calcium Saturation Index as CSI decreases as water temperature gets colder. Raise the pool pH to keep CSI above -0.6 to avoid damaging a plaster pools surface through etching.

Equipment Over the Winter

During the Winter users can minimize their pump run time and only run it to keep their chemicals mixed. If you have trees dropping leaves into your pool you may want to consider some type of skimmer leaf guard. This will help prevent your skimmer from being clogged and starving your pump of water.

Some manufacturers of gas heaters warn that cycling the heaters on and off when the water is less than 70°F can cause damage. Because of this you should be mindful that using your heater to keep pool water above freezing can cause damage. You can read more about this in Heater Condensation. If you do opt to run your gas heater with water below 70°F it should be done in one cycle to get your water above 70°F. Then keep it above 70°F using the heater if desired.

Contingency Planning for Freezing Weather

As the warm weather starts to give way to cooler temperatures, it's important to be prepared for the possibility of freezing weather, especially if you live in an area that doesn't typically experience freezing temperatures. Freezing weather can be especially dangerous if it's short-lived and unexpected, as it can catch people off guard and leave them unprepared.

It's especially important to be prepared for freezing weather when you have a swimming pool. When the temperature drops below freezing, the water in your pool can turn to ice, which can damage the pool's pump and pipes. To avoid this, it's a good idea to take a few minutes now, while the weather is still warm, to learn how to shut down your pool and drain the system. This will help you protect your pool and avoid costly repairs in the event of a freeze.

Here are some tips for preparing your pool for freezing weather:

Keep the water moving

Moving water is difficult to freeze, so it's important to keep the water in your pool circulating as much as possible. If your system has freeze protection, make sure it is operating properly. If you're not sure, it's better to turn it off and manually set the system to run 24/7 until the freezing temperatures subside.

Have a backup plan for power outages

Power outages can be a major problem when it comes to freezing weather. To prepare for this possibility, consider the following:

  • Know how to drain your equipment quickly if power does not return. Look for drain plugs on your pump pot, filter, and heater (if applicable).
  • Wrap exposed plumbing and equipment with insulation materials to protect them from the freeze.
  • Place a decent weight painter's tarp (fabric or polymer) or heavy blanket over the equipment pad. Some people might even place one or two contractor/painter lamps with 100W incandescent bulbs in them under the tarp for warmth.
  • If you have accessories that you can't keep running (e.g. waterfalls, spill-overs, etc.), consider closing them in advance. If you can access the outlet area of the feature, try to vacuum out some water close to the ground's surface or plumbing exit and add some RV antifreeze to the plumbing at that exit area for insurance.
  • Watch for standing water. This can be a problem for waterfalls as the water may slip into cracks and grout areas and then later expand and cause damage. Remove standing water and/or consider covering the area with a tarp if possible.
  • Have a couple pieces of cut-up pool noodles or a plastic jug (half full) to place in the skimmer(s) in case power does not return for a long time. Also consider placing a cover over the skimmer lid to prevent it from freezing stuck in place.
  • Autofills: Remember that any exposed autofill line will not have water actively moving through it. Water only moves when it's filling the pool. If possible, shut off the autofill line and purge some water from it to prevent expansion in the line. At the very least, be sure to wrap any exposed autofill lines well.
  • Heaters: It's best to allow water to run through them, but do not activate the heat mode. Only allow water to continuously flow. As with other equipment, know where your drain plugs are in case power is lost for a significant amount of time.
  • Inspect all areas at the equipment pad for leaks. These tiny leaks will be the first to freeze and could be harmful to equipment. Try to resolve them if possible or take extra precautions to protect the area from freezing if possible.

By following these tips and being prepared, you can help protect your pool from freezing during unprecedented cold weather.

The Physics of Freezing and Freeze Protection

To understand when you need to worry about the pool or equipment freezing read The Physics of Freezing and Freeze Protection.

.