Difference between revisions of "Hayward EcoStar Pumps" - Further Reading

(Created page with "=Hayward EcoStar Pumps= EcoStar is a line of Variable Speed Pumps (VSP) ==Freeze Protection== The EcoStar does not have built in freeze protection. It does have a low temp se...")
 
Line 4: Line 4:
 
==Freeze Protection==
 
==Freeze Protection==
 
The EcoStar does not have built in freeze protection. It does have a low temp setting that only keeps the drive at or above the low temp set point. It is not intended to protect the system from freezing.<ref>https://www.troublefreepool.com/threads/hayward-ecostar-pump-freeze-protection-setting.52993/post-949524</ref>
 
The EcoStar does not have built in freeze protection. It does have a low temp setting that only keeps the drive at or above the low temp set point. It is not intended to protect the system from freezing.<ref>https://www.troublefreepool.com/threads/hayward-ecostar-pump-freeze-protection-setting.52993/post-949524</ref>
 +
 +
==Low Temperature Operation==
 +
Press menu, press and hold < > and it will unlock configuration menu. Press > till you get to “low temp operation” it takes more than 7 presses to get to it. There you can enable or disable. I think the next press will get to the speed it will run at. Press again and you can set temp.<ref>https://www.troublefreepool.com/threads/hayward-ecostar-pump-freeze-protection-setting.52993/post-447522</ref>

Revision as of 17:16, 28 September 2019

Hayward EcoStar Pumps

EcoStar is a line of Variable Speed Pumps (VSP)

Freeze Protection

The EcoStar does not have built in freeze protection. It does have a low temp setting that only keeps the drive at or above the low temp set point. It is not intended to protect the system from freezing.[1]

Low Temperature Operation

Press menu, press and hold < > and it will unlock configuration menu. Press > till you get to “low temp operation” it takes more than 7 presses to get to it. There you can enable or disable. I think the next press will get to the speed it will run at. Press again and you can set temp.[2]