Difference between revisions of "Jandy AquaPure SWG" - Further Reading

Line 9: Line 9:
  
 
A member found that the new part fit perfectly with the same mounting holes.  Even the High Voltage side wires were color coded identically. The only difference is the new part has a ground wire that was attached to the common ground.<ref>https://www.troublefreepool.com/threads/jandy-power-center-transformer-replacement-aquapure.194422/</ref>
 
A member found that the new part fit perfectly with the same mounting holes.  Even the High Voltage side wires were color coded identically. The only difference is the new part has a ground wire that was attached to the common ground.<ref>https://www.troublefreepool.com/threads/jandy-power-center-transformer-replacement-aquapure.194422/</ref>
 +
<gallery>
 +
File:Jandy T1005.png|thumb|Jandy T1005
 +
File:Jandy R0481400.png|thumb|Jandy R0481400
 +
File:Jandy T1005 Transformer.jpg|thumb|Jandy T1005
 +
File:Jandy T1005 Burnt Plug.jpg|thumb|Jandy T1005 Burnt Plug
 +
</gallery>

Revision as of 16:35, 28 September 2019

Jandy AquaPure SWG

AquaPure salt-water chlorine sanitizing systems use salt water to deliver water sanitation.

AquaPure cells connect with PureLink power center and AquaLink automation controllers.

Power Center Transformer

Older Power Centers use a rectangle transformer P/N T1005 that is no longer available. Currently, Jandy has part R0481400 which is the round transformer.

A member found that the new part fit perfectly with the same mounting holes. Even the High Voltage side wires were color coded identically. The only difference is the new part has a ground wire that was attached to the common ground.[1]