Line 14: | Line 14: | ||
However if you have two extra buttons available, you can assign different time periods to each while having the same functions. | However if you have two extra buttons available, you can assign different time periods to each while having the same functions. | ||
+ | |||
+ | The only downside to a group function is that it needs to use one of the Aux relays. | ||
==CMS comm error== | ==CMS comm error== |
Revision as of 13:31, 22 October 2019
Hayward ProLogic
Goldline introduced AquaLogic in 2003. Hayward acquired Goldline in August of 2004. Hayward discontinued AquaLogic in 2008 and replaced it with Prologic.
ProLogic uses the GLX-PCB-PRO board.
The Chemistry Sensing Module is a separate system for PH and ORP monitoring and some people fell is a waste of money.[1]
Spa Spillover
You can enable the Spa Spillover in the Configuration Menu.
To schedule the spa spillover to run automatically you use a group function assigned to an aux button. But you can only assign one time period to each button.[2]
However if you have two extra buttons available, you can assign different time periods to each while having the same functions.
The only downside to a group function is that it needs to use one of the Aux relays.
CMS comm error
The CSM (Chemistry Sensing Module) comm error appears when Sense & Dispense is enabled, but the Chemistry Sensing Module is not found.[3]
If yes, verify that it's plugged in.
If no, disable Sensing System in the Configuration Menu.[4]
- ↑ https://www.troublefreepool.com/threads/hayward-aqua-plus-check-system-light-on.191535/post-1688455
- ↑ https://www.troublefreepool.com/threads/spillover-question.195423/post-1722887
- ↑ https://www.troublefreepool.com/threads/hayward-goldline-aqua-plus.194999/post-1718637
- ↑ https://www.troublefreepool.com/threads/hayward-aqua-plus-check-system-light-on.191535/