Would it be possible to include estimate of resulting CSI and TA in the pH adjustment screen?

[SoDel]

Background: my “workflow” for adjusting pH is tested pH is higher than I want, use a different step to figure how low I can adjust pH without making CSI excessively low and make a mental note of estimated resulting TA, go back to PoolMath and enter that lower pH as target. Add the suggested amount of acid and hit the log addition button.

The ask: have the pH adjustment screen display resulting estimated CSI and TA using the entered target pH. If it did this, I could enter a hypothetical target pH and immediately see what that would be expected to do to the CSI and TA (what the target pH would do to the CSI and what the suggested amount of acid needed to hit that target would do to TA).

Thank you.

 

[mas985]

PH and CSI are linear 1:1. So a -0.1 change in PH changes CSI by -0.1 with all other things being equal.

 

[YippeeSkippy]

If on a lap top you can use the older classic version of PoolMath. It has you enter your "current" values in one column with your "desired" values in a second column next to the first. You can see right off how it changes your CSI.

PoolMath

Discover the calculator behind the perfect pool, PoolMath. Dealing with pools has allowed TFP to become the original authors of the best calculator on the net.

www.troublefreepool.com

**Just note that when using this version of PoolMath you FIRST you have to enter the pool gallons at the top and go all the way to the bottom and choose your <pool type> , <source of chlorine> and that you're using <TroubleFreePool> goals.

Maddie