Wood Project - Walnut Picture Frame

PoolGate

Gold Supporter
TFP Guide
Jun 7, 2017
9,143
Damascus, MD
Pool Size
29000
Surface
Plaster
Chlorine
Salt Water Generator
SWG Type
Jandy Aquapure 1400
I just finished up the below frame in Walnut. The inner frame is linen wrapped poplar. The Walnut started out as rough sawn lumber. I did the molding with a large router table bit. Oh - and the picture is my wife's latest masterpiece from Cairnwood estate outside of Philadelphia that she recently visited.

1581265560337.png
1581265575697.png
1581265585432.png
1581265593146.png
1581265604799.png
 
  • Like
Reactions: Arizonarob
Very nice, those large molding bits are scary when they are running.
How did you join the frame at the corners, is it purely glued or have you dowel jointed or used some other method.

Thanks!

On my larger frames I use biscuits but for this size, just glue. I thicken the frames with 1x2 stock which adds a lot of strength to the joint.
 
Thread Status
Hello , This thread has been inactive for over 60 days. New postings here are unlikely to be seen or responded to by other members. For better visibility, consider Starting A New Thread.