Wiring my Circupool SJ-55 to my Pentair 342001 SuperFlo VS

[chavezone]

So I currently have my Circupool SJ-55 wired to my old pump timer, I am not to happy with this setup and afraid the pump will turn off and the SWCG will run dry.
Can you guys tell me if this swcg generator is even an option to wire to my pump so they run simultaneously

Thanks for any advice

 

[mknauss]

No. You can look into a current sensor or some other type of device. But the Superflo cannot control your SWCG.

 

[chavezone]

No. You can look into a current sensor or some other type of device. But the Superflo cannot control your SWCG.

would a flow switch work or does that only work with the right kind of pump?

 

[mknauss]

Your SWCG has a flow switch. That is your secondary safety device. Your timer right now is your primary safety device.

 

[laprjns]

I use this current sensing device, CR4395-EH-120-110-X-CD-ELR-I. It senses current on one of the pump's 220v lines and switches 120V to my SWCG. Current trip point is adjustable.