Will the J&J ColorSplash LED work with Hayward automation?

[jmag14]

Hello, new on the site! 2 months ago we inherited our first inground (14,000 gal) pool/spa with Hayward OmniPL system. The previous owner installed incandescent bulbs in a last-minute effort to pass the home inspection, the system was not set up for incandescent. And ironically, blew out and flooded when I tried to test them after moving in.

Long story long…. switching to LEDs and wondering if this will work with Hayward automation.
Thank you!

Here is the link:
J&J Electronics 120V, 32W ColorSplash Color Changing and White LED Pool Lamp 26910 https://a.co/d/89yN2QI

 

[1poolman1]

Hello, new on the site! 2 months ago we inherited our first inground (14,000 gal) pool/spa with Hayward OmniPL system. The previous owner installed incandescent bulbs in a last-minute effort to pass the home inspection, the system was not set up for incandescent. And ironically, blew out and flooded when I tried to test them after moving in.

Long story long…. switching to LEDs and wondering if this will work with Hayward automation.
Thank you!

Here is the link:
J&J Electronics 120V, 32W ColorSplash Color Changing and White LED Pool Lamp 26910 https://a.co/d/89yN2QI

That bulb will not communicate with automation directly. It uses on/off at the switch or relay to set colors or patterns.

 

[jmag14]

That bulb will not communicate with automation directly. It uses on/off at the switch or relay to set colors or patterns.

Thanks poolman. What bulbs are you using with your Hayward system?

 

[1poolman1]

Thanks poolman. What bulbs are you using with your Hayward system?

I have a J&J bulb in a Pentair Amerilite fixture.