I live in Florida. We got approx 10 inches of rain from Hurricane Ian. We got an additional 4-5 inches just a few days ago. Just yesterday, I notice small, almost tissue like white patches on my pool surface. I netted the pool and the white looked to be somewhat slimy in the net. Is this White Water Mold or scaling from my SWCG?
My cartridge filter hasn't been cleaned in 90 days (we haven't used the pool very much), and it's been at least 8 months or more since I cleaned the SWCG with an acid/water mixture. I plan on cleaning both later today.
I tested my water this morning (Taylor Kit) and these are my numbers:
4.0 FC
0.0 CC
7.9 pH
60 TA
0.0 CYA (Yes I know. All the rain I suppose)
3395 Salt
78 Water Temp
0.04 CSI
Other than a regular cartridge and SWCG cleaning this afternoon, what do you suggest? I was planning on balancing the chemicals as well. Never saw this in my pool before. Let me know. Thanks for your help.
Charlie
My cartridge filter hasn't been cleaned in 90 days (we haven't used the pool very much), and it's been at least 8 months or more since I cleaned the SWCG with an acid/water mixture. I plan on cleaning both later today.
I tested my water this morning (Taylor Kit) and these are my numbers:
4.0 FC
0.0 CC
7.9 pH
60 TA
0.0 CYA (Yes I know. All the rain I suppose)
3395 Salt
78 Water Temp
0.04 CSI
Other than a regular cartridge and SWCG cleaning this afternoon, what do you suggest? I was planning on balancing the chemicals as well. Never saw this in my pool before. Let me know. Thanks for your help.
Charlie
