I'm trying to figure out what sand filter I have... there are no labels anywhere. I also want to get a label for the multi-port valve at the top because I'm not 100% sure what each position does. Mainly want to know which positions backflow and rinse are. Any help appreciated!
What sand filter do I have?
- Thread starter skiggs
- Start date
I'm guessing the brand is Pentair... @skiggs
Can you provide the measurements? (widest point & height)
I think your label will look like this:
Can you provide the measurements? (widest point & height)
I think your label will look like this:
@splashpad I measured based on the diagram that @JamesW linked on the Pentair website.
It's about H = 42" x W = 24"
I measured from ground to top of port handle and the widest point on the filter. I drew a pretty picture... So I am guessing it is a TA60D? Or could it be an older model?
It's about H = 42" x W = 24"
I measured from ground to top of port handle and the widest point on the filter. I drew a pretty picture... So I am guessing it is a TA60D? Or could it be an older model?
Attachments
Looks like a Pentair Sand Dollar SD60 which is equal to the Tagelus TA60. Here's a picture of the SD60 valve positions. The port to the left is the inlet (pump) port.
Thanks! One more question - I am using the PoolMath app and I am trying to figure out what my 24 hr SWG Chlorine output is. I have a Hayward TurboCell GLX-CELL-5... that does not appear in the app's pooldown menu and I can't find anything online about it. Any ideas?
About 0.65 lb/day (chlorine gas) for a T-5.
T-Cell-3 = 0.53 lbs/day
T-Cell-9 = 0.98 lbs/day
T-Cell-15 1.47 lbs/day
T-Cell-3 = 0.53 lbs/day
T-Cell-9 = 0.98 lbs/day
T-Cell-15 1.47 lbs/day
Last edited:
So the pressure gauge does not move on the this filter... does it use the 1/4" gauge listed on tftestkits shop? I think I need a replacement.