Tested my Fiberglass, saltwater pool this afternoon
FC 14
CC 0
pH 7.5
TA 60
CH 200
CYA 45
Salt 3200 (using drop test)
Per SWG control temp is 73, salt 2.9, 30%
I'm on the east coast (Philly area) we have had an unusually wet spring (just had to drain some water off), cool nights and below normal daytime temps.
Water looks good but that FC number is so high. What are your thoughts on what I should do?
FC 14
CC 0
pH 7.5
TA 60
CH 200
CYA 45
Salt 3200 (using drop test)
Per SWG control temp is 73, salt 2.9, 30%
I'm on the east coast (Philly area) we have had an unusually wet spring (just had to drain some water off), cool nights and below normal daytime temps.
Water looks good but that FC number is so high. What are your thoughts on what I should do?