we have done the muriatic acid test and used wet/dry sandpaper (1000 gr) as instructed by out pool manufacturer and when sanded the color is under the shadow/scale substance! we are getting ready to have ecofinish (polyfibro) done to pool! Has anyone on this site familiar with this process?
we have a 3 year old saltwater fiberglass pool that has developed some type of shadow/scale????
- Thread starter lcourt02
- Start date
- Jul 21, 2013
- 52,958
- Pool Size
- 35000
- Surface
- Plaster
- Chlorine
- Salt Water Generator
- SWG Type
- Pentair Intellichlor IC-60
Welcome to TFP.
Use SEARCH on the top of the page for “ecofinish” and you will find a bunch of threads on it.
@Texas Splash may have thoughts on your scale problem.
Use SEARCH on the top of the page for “ecofinish” and you will find a bunch of threads on it.
@Texas Splash may have thoughts on your scale problem.
- Jun 22, 2014
- 47,873
- Pool Size
- 17888
- Surface
- Fiberglass
- Chlorine
- Salt Water Generator
- SWG Type
- CircuPool RJ-45 Plus
Welcome! 
I have not personally had the ecofinish done, but you might look at the following thread. A couple of those members have had it done with what seems to be mixed results.
www.troublefreepool.com
I have not personally had the ecofinish done, but you might look at the following thread. A couple of those members have had it done with what seems to be mixed results.Calcium scale and negative CSI in fiberglass pools
Hi All, Long time lurker. I’ve been battling a calcium scale issue the last few years and trying to get answer. Will keeping CSI in negative reverse calcium scale on its own and dissolve back into water? I have the classic chalky areas on walls, floors, steps and seats. I have used a piece...
www.troublefreepool.com