So, pulled the cover off today and ran through my tf100
FC - 0
CC - 0
Ph - ~7.0 (a little higher)
Alkalinity - 100
Calcium - 110
CYA - Below 30
I have a mesh cover, so I'm sure that ran the calcium and CYA down pretty good.
On closing I had
FC - 10
CC - 1
PH - ~7.5
Alkalinity - ~100
Calcium - 350
CYA - 60
Pool calc has me putting in 2 jugs of 10% Bleach, 6lbs of Baking Soda, 40lbs of Calcium, ~7lbs of CYA to get me to 30
I'm not so sure I need to add so much calcium as my water is REALLY hard to start with and it will jut keep going up over the summer as I fill it.
Should I start with the CYA and the Bleach then go from there? I've got socks ready, just trying to find stabilizer locally.
FC - 0
CC - 0
Ph - ~7.0 (a little higher)
Alkalinity - 100
Calcium - 110
CYA - Below 30
I have a mesh cover, so I'm sure that ran the calcium and CYA down pretty good.
On closing I had
FC - 10
CC - 1
PH - ~7.5
Alkalinity - ~100
Calcium - 350
CYA - 60
Pool calc has me putting in 2 jugs of 10% Bleach, 6lbs of Baking Soda, 40lbs of Calcium, ~7lbs of CYA to get me to 30
I'm not so sure I need to add so much calcium as my water is REALLY hard to start with and it will jut keep going up over the summer as I fill it.
Should I start with the CYA and the Bleach then go from there? I've got socks ready, just trying to find stabilizer locally.