Trying to find a solution for a bomgie pool pump plumbing from intex sand filter to pump

[Redmanriggs41]

Is there an adapter for an intex sand filter pump that will adapt to pool piping

 

[Rancho Cost-a-Lotta]

Welcome to TFP!

I can't say I'm of any help, but I remember someone having similar inquiry in the past. Hopefully the thread will help you:

Intex salt water hard line plumbing

I have a pentair pump and filter and I'm having no problem getting the plumbing fittings to hook them up. My Saltwater system is a different story. It looks like the male threads on the Itex are 2" DWS, and I want to get to 1 1/2" PVC. So I need 2 fittings that go from 2" DWS to a 1 1/2"...

www.troublefreepool.com

This video in the thread solved the OP's problem:

 

[Newdude]

@harleyl7 just converted his plumbing. He ended up with different equipment but the problem should be the same.

 

[harleyl7]

@harleyl7 just converted his plumbing. He ended up with different equipment but the problem should be the same.

Yepp, I did something a little different and a lot easier imo.

Bought two of these:



Used the Intex collars that came with the hose that comes with the Intex SWG. Sanded them 320 and then 2000 grit.

Then put it on the machine and used PVC coupling. Ez

 

[Rancho Cost-a-Lotta]

Thank you for responding. Not sure if the OP will return, but I have another thread to keep in the back of my mind.

 

[dereksanders]

Yepp, I did something a little different and a lot easier imo.

Bought two of these:

View attachment 646347

Used the Intex collars that came with the hose that comes with the Intex SWG. Sanded them 320 and then 2000 grit.

Then put it on the machine and used PVC coupling. Ez

I used the same process with success.