TruClear SWCG with iAqualink

[HermanTX]

Ok, got the cable all hooked up. What kind of interaction does this model have with Aqualink? I only see anything when I go to 'Web' and the click on Status.

Is that an accurate Salt PPM reading? Or just a default?

The RS485 cable worked as now the status is showing 0% AquaPure

Go To Menu and there will be an icon t Set AquaPure
Then you will have option to set a % in either Pool or Spa or both

 

[PoolGate]

I have it set for 40% outside. I'm assuming if I make a change here it will overwrite that?

This is a good question. Try it! On the regular AquaPure the same setting shows on both the LCD screen and in Aqualink. It is very odd that they are different in your case.

 

[ajw22]

Is that an accurate Salt PPM reading? Or just a default?

Default.

See post #7.

 

[ajw22]

Cool! Yes, it is what the SWG is reading. Do you see the settings under "menu" and "Set AquaPure" screen?

He does not have an Aquapure. He has a TruClear.

 

[HobieDallas]

This is a good question. Try it! On the regular AquaPure the same setting shows on both the LCD screen and in Aqualink. It is very odd that they are different in your case.

The local panel was accidently in Standby mode. I set Pool mode to 40% and it turned the cell into Chlorinating mode and 40%. It then showed 40% output in Aqualink too. Working like it's supposed too! Thanks for all your help