Need to fill a small "dig" in my pool about the size of a $.50 piece. So I got some epoxy pool putty which cures white. Pool is a light blue w/specks. Figured it will be close and no one will notice right? Wrong. Looks like a big blob of white noticeable from 100 feet. Searching online I see some references to tinting 2 part epoxy with acrylic paint. Using Leakmaster Epoxy Stick Pool Repair. Anyone tinted like this before or know the best way to go about? May also try pulverizing one of my blue pool tiles and put some very small pieces in for specks.
Tinting epoxy putty?
- Thread starter firstbase
- Start date
I would suspect that a hardware store, paint store, art supply store or marine store might have a suitable tint for the epoxy.
The hardware store might give you a little bit of paint tint that's suitable for epoxy.
The hardware store might give you a little bit of paint tint that's suitable for epoxy.
Sherwin Williams will sell pigment and I'm sure most others will as well. It would be worth it to find a non-organic pigment
Thanks guys, will check with my local hardware store guy. We still have one and that's a good thing but another subject!