I have just discovered a section of tiles that have come loose at our cover vault wall. The tiles are pushing up and need to be repaired.
Apparently our tile warranty was only 1 year, so we either need to pay the original pool builder to come do the repairs, hire any tile person we want, and/or DIY the fix.
Seem like a pretty easy fix. However, we would need to get the safety cover completely retracted and out of the way. The tile is above the waterline, so there is no problem with water while it is repaired and the mastic or adhesive cures.
One fix I thought of was to just shoot some good construction adhesive or caulk under the tiles and press them back down into place and be done??? Or I could buy some latex modified thinset and do the repair.
Anyone have any ideas or suggestions???
Thanks!
Apparently our tile warranty was only 1 year, so we either need to pay the original pool builder to come do the repairs, hire any tile person we want, and/or DIY the fix.
Seem like a pretty easy fix. However, we would need to get the safety cover completely retracted and out of the way. The tile is above the waterline, so there is no problem with water while it is repaired and the mastic or adhesive cures.
One fix I thought of was to just shoot some good construction adhesive or caulk under the tiles and press them back down into place and be done??? Or I could buy some latex modified thinset and do the repair.
Anyone have any ideas or suggestions???
Thanks!