- Sep 26, 2013
- 717
- Pool Size
- 5900
- Surface
- Fiberglass
- Chlorine
- Salt Water Generator
- SWG Type
- Hayward Aqua Rite (T-3)
I have done two SLAMs one just ending last Saturday. The first one occurred because my flow sensor on my SWG had to be replaced. The second one occurred a week and a half later and I have no reason why that would have happened as I maintain my pool like most of you religiously. Both SLAMs ended with all three criteria being met. My pool has not been as sparkly since I had to do the initial SLAM.
I raised FC last night to 10.5 to do an OCLT and failed this morning with a morning test of FC 8.5 and CC 0.
Current #s
FC 8.5
CC 0
PH 7.4
CH 250
TA 70
CYA 70
Borates 50
During the second SLAM, I did find algae in my pool light and under the rungs of the deep end ladder. I checked both places this morning and they are algae free.
Any ideas? I suppose I will start another SLAM this afternoon when I get back home unless someone has any insight.
I raised FC last night to 10.5 to do an OCLT and failed this morning with a morning test of FC 8.5 and CC 0.
Current #s
FC 8.5
CC 0
PH 7.4
CH 250
TA 70
CYA 70
Borates 50
During the second SLAM, I did find algae in my pool light and under the rungs of the deep end ladder. I checked both places this morning and they are algae free.
Any ideas? I suppose I will start another SLAM this afternoon when I get back home unless someone has any insight.