TA and CYA when balancing

[Peiloy]

Ok. So I have done a bit of reading here on balancing my pool water. There is one thing that confuses me though. For a plaster pool with a SWG, the recommendation here is to have a TA of 60 - 80. Is that recommendation after calculating to remove CYA?
My readings from my Taylor FAS-DPD kit are:
FC: 8
Ph: 7.6
CYA: 70
TA: 70
Calcium: 350
Salt: 3200
Temp is 88F
If I adjust my TA to remove the CYA I get 47. So does that mean I am outside of the recommended range of 60-80?

Thanks for the help!

 

[jblizzle]

No. That recommendation is based on the result of the test. That TA is also the value that can be used directly in PoolMath. No need for a correction.

You are good. Go swimming!

 

[Peiloy]

Perfect! Thanks Jblizzle!