T-Cell 15 Current Sensor error.

[diesel1218]

Hi all waiting to hear back from warranty and my pool contractor but I am getting the following errors on my T-cell 15 thought I would see if anyone here knew.

Alarm for " Home" at Mar 30, 2024 18:15:59, Reason:T-CELL Current Sensor Short Chlorinator1.
Alarm for " Home" at Mar 30, 2024 18:15:59, Reason:CHLOR Relay K1 Stuck Open Chlorinator1.
Alarm for " Home" at Mar 30, 2024 18:15:59, Reason:CHLOR Relay K2 Stuck Open Chlorinator1.

If I power down the panel and restart it, it just comes right back once the pool primes.

 

[ajw22]

There are three fuses on the Omnilogic motherboard, two are 4 amp and one 20 amp. Check the fuses. It is often one of the pink fuses that blew.

Also check the T-cell cord connector for burns and the board.

 

[diesel1218]

There are three fuses on the Omnilogic motherboard, two are 4 amp and one 20 amp. Check the fuses. It is often one of the pink fuses that blew.

Also check the T-cell cord connector for burns and the board.

thanks not seeing any blown fuses and the board for the power seems fine too.

 

[JamesW]

Can you pull the circuit board and show clear pictures of both sides?

 

[diesel1218]

Can you pull the circuit board and show clear pictures of both sides?

I don’t think that’s something I want to do. I put in a service request with my contractor as my pool is still less than a year old. Oddly enough the fuses I pulled and checked and put back in seem to have cleared the error for now anyway. Has not popped back up yet.