Hi Folks:
I've got a T-15 AquaRite SWG connected to fly 32000 gallon pool. This is my 8th season with the SGW.
I changed to a variable speed pump over the winter.
My SWG is starting to show its age. It's not showing accurate salt levels when viewing the "live" salt content when generating. My dip stick says I'm at 3500, but SWG reads live salt at about 2800 at full pump speed.
I have a new problem. When the pump speed drops to 1400 RPM for most of the day, the "live" salt content drops as well. Down to 2000. And then it throws the "Low Salt" warning with "Check Cell"light. Both lights flashing.
Any ideas on how to avoid this other than adding more salt that my pool doesn't need or changing the cell?
I've got a T-15 AquaRite SWG connected to fly 32000 gallon pool. This is my 8th season with the SGW.
I changed to a variable speed pump over the winter.
My SWG is starting to show its age. It's not showing accurate salt levels when viewing the "live" salt content when generating. My dip stick says I'm at 3500, but SWG reads live salt at about 2800 at full pump speed.
I have a new problem. When the pump speed drops to 1400 RPM for most of the day, the "live" salt content drops as well. Down to 2000. And then it throws the "Low Salt" warning with "Check Cell"light. Both lights flashing.
Any ideas on how to avoid this other than adding more salt that my pool doesn't need or changing the cell?