Hello All,
I have a Hayward Salt Cell and I'm running the single speed motor for 8 hours at 75% chlorine output. I would like the FC to be ~ 5-7ppm but I notice that the FC dips down to almost 2ppm. I have done an OCLT and it passed the tests. For now I am adding Liquid Chlorine (10%) to bring it up to 7ppm. The summer temperatures here in Texas is in the 100s with long sunlight. Should I be looking to increase the pump run time and the SWG chlorine output?
I'll be adding LC to bring it up the FC to 10ppm today and will test OCLT again tomorrow morning. Outside of Algae, do you all recommend running the pump for 12 hours at 100% output?
I have a Hayward Salt Cell and I'm running the single speed motor for 8 hours at 75% chlorine output. I would like the FC to be ~ 5-7ppm but I notice that the FC dips down to almost 2ppm. I have done an OCLT and it passed the tests. For now I am adding Liquid Chlorine (10%) to bring it up to 7ppm. The summer temperatures here in Texas is in the 100s with long sunlight. Should I be looking to increase the pump run time and the SWG chlorine output?
I'll be adding LC to bring it up the FC to 10ppm today and will test OCLT again tomorrow morning. Outside of Algae, do you all recommend running the pump for 12 hours at 100% output?