strange chlorine level behavior

I'll use distilled water and try! thank you again!!!
If you use distilled water, that should work well enough.

Pool Water........Distilled Water.....Multiply by

..........1...........................1...............................2
..........1...........................2...............................3
..........1...........................3...............................4
Hello guys,

i do not know what to do. I've tryed to test pool water 1:1 with distilled water. Here the resoult already doubled:
FC: 0.56ppm
CC: 6.22ppm
TC: 6.78ppm

Is that possible? Water is now cristal clear.

How can I handle the situation till new test arrive?
 
I'm in PANIC.

I did not trust the value of the diluited water and I did the test again on plain pool water:

PH 7.4
CYA 57ppm
FC 5 ppm
CC 0.8 ppm
TC 5.8 ppm
TA 160 ppm
CaH 218 ppm

should I consider this values? If yes how can I go haed? SLAM without proper test or increse the CL to 7ppm/9ppm?

Help me please.
 
The high CC value is not possible unless you have added non chlorine shock. Check to be sure the distilled water was not adulterated.
 
The high CC value is not possible unless you have added non chlorine shock. Check to be sure the distilled water was not adulterated.
Mknauss, I've used the water that we use for ironing. Do you think I can trust to the secondo set of measure (plain poll water)? What do I do? Still SLAM?

Now is also raining a lot and my skimmer pool seems an infinite edge.. 15cm on rain in less then one our.
 
Thread Status
Hello , This thread has been inactive for over 60 days. New postings here are unlikely to be seen or responded to by other members. For better visibility, consider Starting A New Thread.