This group was so helpful in the slam process I did a couple months ago. The pool areas itself are clean but the spa area with the overflow just keeps having it grow. There is constant flow of water in the spa are and a few hours a day the spa runs to filter that water. Chlorine is at 6 now (just turned down the swag a bit as I added some stabilizer). Do I slam just the spa?
Spa still has algae even after SLAM
- Thread starter unbrokenlink
- Start date
- Jun 24, 2021
- 16,073
- Pool Size
- 29000
- Surface
- Vinyl
- Chlorine
- Salt Water Generator
- SWG Type
- CircuPool RJ-60 Plus
- Jun 24, 2021
- 16,073
- Pool Size
- 29000
- Surface
- Vinyl
- Chlorine
- Salt Water Generator
- SWG Type
- CircuPool RJ-60 Plus
So at some point since SLAM, if you met all three exit criteria, your FC got low enough to allow algae to grow again.
Time to SLAM again.
Is the water shared between the pool and the spa?
Time to SLAM again.
Is the water shared between the pool and the spa?
Yes shared. Slam the entire thing or just spa portion? I think I’ll hit the requirements quick
- Jun 24, 2021
- 16,073
- Pool Size
- 29000
- Surface
- Vinyl
- Chlorine
- Salt Water Generator
- SWG Type
- CircuPool RJ-60 Plus