Slamming Target

runboy

Well-known member
Jun 26, 2018
161
Mesa/AZ
Sorry if this has been answered before, but is the recommended Slamming Target a max or a min for the process? My target is 31 PPM and my pool eats 9 PPM during daylight hours.
In a perfect world I would ad every hour, but if that is not possible should I attempt to stay above?
 
When following the SLAM Process process test and dose back to SLAM level as often as possible. At the beginning it is a big help to do it every couple hours. After the FC starts to hold better 4 times per day is good.

Do not go too far over SLAM level. It is essentially a waste of chlorine. As long as the FC stays above minimum, algae is not growing, it is just not being eradicated as fast.
 
Thread Status
Hello , This thread has been inactive for over 60 days. New postings here are unlikely to be seen or responded to by other members. For better visibility, consider Starting A New Thread.