Salt readings not corresponding to test results. I have reset the generator controller.
- Thread starter Streetbuc
- Start date
- Jul 21, 2013
- 53,075
- Pool Size
- 35000
- Surface
- Plaster
- Chlorine
- Salt Water Generator
- SWG Type
- Pentair Intellichlor IC-60
As long as the SWG is happy all is fine. The SWG salinity is an estimate based on a different way of measuring. It never matches. As the cell gets depleted it will diverge more.
Don’t raise the salt level more than necessary to keep the SWG happy.
www.troublefreepool.com
Don’t raise the salt level more than necessary to keep the SWG happy.
Hayward Aquarite SWG - Further Reading
www.troublefreepool.com
Thank you for your reply!
This is only the second season for the salt cell and it is spotless. I just checked with taylor kit again and reads 3200 ppm. Now generator is reading 2800 ppm after reset.
This is only the second season for the salt cell and it is spotless. I just checked with taylor kit again and reads 3200 ppm. Now generator is reading 2800 ppm after reset.
Similar threads
