Circupool rj60+ salt reading says 3800 to 4000, tf 100 salt test say 2800 who do I trust. Pool is clean clear but a bit dull looking . My fc should be 3 to 5 but I kept it at 8 to be safe but now the swg has only kept it at 5 with no changes to the setting, any suggestions thanks
Salt level question
- Thread starter REBARBEE
- Start date
- Jun 22, 2014
- 52,045
- Pool Size
- 17888
- Surface
- Fiberglass
- Chlorine
- Salt Water Generator
- SWG Type
- CircuPool RJ-45 Plus
Testing with a Taylor K-1766 salt test kit is always more accurate. The module reading can vary based on cell age, water temp, and basically how it feels that day.
My module reading can fluctuate from 2,700 then show 3,500 a few hours later for no reason. How old is your cell? When was the last time you cleaned it? Your Poolmath logs haven't been updated in a long time. Can you share a full set of water test results?This one is less than a year old, discount salt sent a new one, 1st was faulty,so I haven't cleaned it. It's now reading 3200 3300, I retested twice this morning with taylor test and got 3200 both times,not sure what I did yesterday to get low reading. Started aration on pool and some of dullness has left already, thanks T S for your response and help, I logged my test results
