RJ60 plus up and running

[Jsf721]

The SWG came online yesterday. Water temperature 55 degrees on the thermometer. My friend was able to handle the install for me.

Set at 60 percent and I won’t be able to check FC for a while as surgery is in 5 hours. Let’s hope the pool company can do their thing right.

Have a good few days everyone-

 

[wireform]

How many hours a day is the pump running.

 

[Jsf721]

How many hours a day is the pump running.

10

 

[PoolStored]

Very nice! Congrats.

Hope your surgery goes well!!!

 

[Jsf721]

Just reading my RJ60 plus manual. Lol. Plenty of time to read while recovering. It measures the salinity of the pool and comes up with a 4100 number. Doing the test with the drops I’m getting 3800. Who’s more accurate.

I guess I’ll kind of average them until I figure it out. As long as I’m North of 3000 supposedly the generator will make chlorine. Does it make more chlorine or stronger chlorine with a higher salinity? I’ve searched but can’t find an answer.

 

[Newdude]

Who’s more accurate.

You have less variance than the cell, but you may be off and the cell may be right if they are close. If they are far apart, trust yours.

Does it make more chlorine or stronger chlorine with a higher salinity?

No. I like to run the lower 3000s because we start tasting the salt more at 3k. So I'll start at 3400 or so and let the rain dilute it down to 3000 before adding more.

 

[Jsf721]

You have less variance than the cell, but you may be off and the cell may be right if they are close. If they are far apart, trust yours.

No. I like to run the lower 3000s because we start tasting the salt more at 3k. So I'll start at 3400 or so and let the rain dilute it down to 3000 before adding more.

Ok I should have asked before I added salt. I’ll let it dilute. Or depending on my cya maybe dump and fill a little.

 

[Newdude]

4000 is fine. So you taste it, *a little*. You got the ocean right down the block and thats nearly 10x. Lol.