RJ-60 SWG No Lights no nothing after pressing red button

[delaneybob]

I pressed the red circle button to shutdown the SWG for metal removal. Now nothing happens. when I press the button to return the system to operation I looked at the manual and nothing there.

Is there some secret sequence? I tried holding the button down

Thanks

 

[delaneybob]

Never ming - I figured it out- the wiring to the Aux port on VSP is max 6 hours over 1000 rpm so its not feeding thew SWG

Disregard

 

[ajw22]

Did you check and reset the CB the RJ-60 is connected to?

Check there is voltage at the RJ60 using a multimeter.