Reprogramming Pool Lights - iAquaLink

[LilMavdog]

I think I need TJ reprogram my spa lights via my iAquaLink.

We have 2 pool lights and 1 in the spa. When we moved in they were all synced up to the presets in the iAquaLink App. However the spa light stopped working last year after an intermittent battle, I believe that is because the GFi outlet for that specific light needs to be replaced (a project for an upcoming weekend).

However… the pool lights are just all over the place. If I use Alpine white sometimes one is white and the other stays dark blue, sometimes they both stay blue, sometimes when I have them on and switch to a different preset they don’t cycle through the usual change and just stay whatever color they are. I’ve had it on Colbolt Blue and one stays white and the other starts cycling through all of the colors.

Please help… not sure where to start OR is the spa light the root of the entire problem?

Thanks All

PS all of the photos are with the setting Alpine White (all tried one after the other)

 

[ajw22]

@PoolGate posted this a while ago…

6.2 To Reset to the Beginning of the Color Sequence Turn the light OFF, wait four (4) to five (5) seconds, then turn ON, the light will return to the beginning of the color cycle (Alpine White).

NOTE If an AquaLink® RS control system is being used the color set can be selected using the indoor controller.

NOTE To synchronize colors on multiple Jandy Pro Series WaterColors RGBW LED Light systems wired to separate switches, perform the above actions on all of their switches simultaneously. All Jandy Pro Series WaterColors RGBW LED Lights will synchronize automatically if activated by the same switch. No other accessories are required.

 

[ajw22]

Jandy Nicheless Small LED Pool Lights Out of Sync

My two "Jandy Nicheless LED Pool Lights" go out of sync randomly. You know ... randomly, like every three to six months. I have followed several different "reset sequence" formats (from the manual, from tips on line, from the pool builder) to NO AVAIL. I've always had to have a technician come...

www.troublefreepool.com

 

[ajw22]

Jandy watercolors LED lights won't cycle through colors

Hi everyone - I've searched and searched the internet but can't find any info. I have 2 Jandy watercolors LED lights that won't go through their color cycles automatically. I've turned them off, turned the power off, turned them off for 3 seconds, 4 seconds, 6 seconds, 7 seconds, 8...

www.troublefreepool.com