Replacing Raypak heater display

[tim_pool_fan]

Has anyone ever replaced just the display on their Raypak heater? My heater is working but not displaying properly. Upon startup this season I actually thought it wasn’t powering up but eventually realized it’s just the display. Oddly if you swipe a wet finger across it, you can make out the display for a moment. So it’s really just “cataracts “ on the screen!!

Should I attempt to replace the part? The heater is original to the pool and is about 12yrs old

 

[ajw22]

See pages 26 and 50 in…

https://s3.amazonaws.com/AWSProd/sites/raypakcom/documents/241236.pdf

 

[1poolman1]

Has anyone ever replaced just the display on their Raypak heater? My heater is working but not displaying properly. Upon startup this season I actually thought it wasn’t powering up but eventually realized it’s just the display. Oddly if you swipe a wet finger across it, you can make out the display for a moment. So it’s really just “cataracts “ on the screen!!

Should I attempt to replace the part? The heater is original to the pool and is about 12yrs old

View attachment 505588View attachment 505589

What does the inside of the heater look like? Its about a $110.00 part and 20 minute repair. Literally just plugs in after you gain access to the front of the board. Rust on the door is always a scary site. This is the part:

Raypak LCD Display, OEM - 013640F - INYOPools.com

Raypak LCD Display Screen Only - 013640F

www.inyopools.com