Replacement filter cartridge

[mattboswell24]

Hello, just joined the forum and need some help. I am trying to find a quality replacement filter for my pool. The problem is with my dimensions the only place I can find the exact size is thru the company that I bought the pool from and they are not great. It’s a 95 sqft cartridge. The pics below have the exact measurements. Also, does it have to be exactly 95 sqft? 100sqft is much more common.
Thanks,
Matt

 

[ajw22]

Welcome to TFP.

What brand and model filter is it?

 

[mattboswell24]

On the filters that I get it doesn’t have a number on the filter itself and from what I’ve seen most do. I purchase them thru The Pool Factory, which is where I bought the pool. The filter tank is Hydrotools and the model # of it is 76095CHA. Hope this is helpful!

 

[ajw22]

Hydrotools Replacement Filter Cartridges

Replacement Cartridges We offer all of the popular filter replacement cartridges for pool and spa filters. Our pool and spa cartridges are made with 100% Reemay, a spunbonded polyester filtration media that was made specifically for durability and antimicrobial protection. All our replacement...

www.poolnationusa.com

*Filter Cartridges & Media

hydrotoolsparts.com

 

[mattboswell24]

Would you think the 76101 would work even though it’s 100 sqft instead of 95 and dimensions are slightly off?

 

[ajw22]

Would you think the 76101 would work even though it’s 100 sqft instead of 95 and dimensions are slightly off?

I think so but cannot say for sure. You have to risk trying one.

 

[mattboswell24]

Got it. Would you say that the difference in the sqft would not be an issue?

 

[mattboswell24]

95sqft vs 100

 

[ajw22]

5% in filter area should not make a difference in filter dimensions.

I would be surprised if The Pool Factory has a filter unique to them with proprietary dimensions. But you never know.

 

[arvil]

Actually more square feet is good, more area for water to flow through, resulting in a bit more flow, and a bit less pressure. More area to catch more debris means it’ll clean a bit longer before you need to rinse it. The important thing will be the fit; outside diameter, inside diameter, height, and the configuration of the check valve port. If it fits properly, it’ll be fine.

 

[mattboswell24]

Thank you so much for all of the info!