Replaced the cable on my Maytronics Nautilus CC plus robot and it won't clean the bottom of the pool. It start in the upright position and it goes directly to the wall, turns on it side and attempts to move along sideways. Anyone have any thoughts why this is happening? Thanks
Replaced cable on Nautilus CC plus robot and now the robot won't stay upright
- Thread starter Mcgovern
- Start date
tucsontico
LifeTime Supporter
Be certain the internally mounted floats (styrofoam blocks) are in their correct position and the impeller is turning freely. I've had an issue in the past when I replaced the treads and climbing wheels. The floats near the treads weren't properly seated and got caught in the treads. Of course, this destroyed them and the robot would not run properly. Additionally, be certain the cable floats are installed in nearly the original position. Good luck!