Repair cracked end SWG electrode, plates touching Intex

[aviator79]

So I was getting a low salt warning after setting up pool. I just installed new liner. Tested salt and about 3200ppm so thats good. Removed plate and end is cracked at end and plate are touching so going to repair and see if works.

 

[aviator79]

I cant get pics posted but I am assuming the plates should not touch so I plastic welded end together with plastic spacers. Now with only two connector prongs and 3 plates IDK if this was the right way to repair it. I do not have a new one to compare it to.
As far as I can tell they look separated:
Titanium Electrode For 16 Saltwater System Cg - Saltwater Systems - Replacement Parts - Above Ground Pools - Store - Intex

 

[aviator79]

Well it worked. I will try to upload pics but if other have this issue you can fix. If cant plastic welt could try zip ties or even gorilla or electrical tape...GOOD LUCK! Save me some money.