Note, before reading, that I have no Automation currently.
I noted in the raypak manual that it has the ability to output a digital signal to a VSP pump to call for pump operation during heat/cool operation.
Am I reading this correctly that I could program the Raypak to communicate to my Intelliflo3 via this method so that when the unit needs to run it will tell the pump to adjust accordingly?
I plan, at this time, to run the pump 24hrs at about 15GPM but I know it will need to run higher when the raypak unit is operating and I am hoping this will solve my riddle.
Attached is the screenshot from the raypak manual that lead me to believe this is possible.
Thoughts?
I noted in the raypak manual that it has the ability to output a digital signal to a VSP pump to call for pump operation during heat/cool operation.
Am I reading this correctly that I could program the Raypak to communicate to my Intelliflo3 via this method so that when the unit needs to run it will tell the pump to adjust accordingly?
I plan, at this time, to run the pump 24hrs at about 15GPM but I know it will need to run higher when the raypak unit is operating and I am hoping this will solve my riddle.
Attached is the screenshot from the raypak manual that lead me to believe this is possible.
Thoughts?
