Quick question about bonding pool

[jcs11236]

I’m going to bond pool today. Just not sure if the whole bond is a closed loop? Starting at swg,pump,skimmer/water then 4 post around pool. After I bond last post what do I do with wire? Connect it back to the start or just leave it buried.
Here’s a drawing.

 

[mknauss]

Bonding vs Grounding

Electricity and water don't mix. Learn a few basic tips how to keep your family safe when dealing with electricity around your pool.

www.troublefreepool.com

Loop around the pool and then to your equipment pad.

 

[jcs11236]

Thanks for the reply. I have one more question. My post as well my walls are not metal. Maybe some sort of fiberglass/resin. I’m using a volt meter and no current/continuity in either the walls or post. I do see there is current on the top part under pool caps. Should I install bond up there or still on ground even though no continuity?
Here is a pic of where there is continuity(top screw)

 

[jcs11236]

Found a old thread on this site with a similar type of pool as me and he explains how he did it and how it passed inspection. Best part is that he located in NY so if it’s good for the inspector, it’s good for me.

This site is great

 

[mknauss]