Good morning. We will be installing our AGP metal sided pool in a month. A few questions that we have are:
Can we use the landscape fabric under the sand? So there are no folds or tape seams? We aren’t using the gorilla pad. Just Home Depot landscape
Do we really need stone dust around the edge? We dug a 2ft slope down to level last year and before install will remove the top inch or two if soft. I’ve heard horrible stuff about stone dust on this site regarding corrosion. The finest stone dust we can find is over a grain of rice at least in size. Any help would be appreciated.
We are setting it on 12x12 pavers dug flush with the dirt next to it. 3 inches of sand inside the pool wall. Vbead liner 27x54 resin bottom cuffs. Ps. The tarp and bricks are covering the site so the winter didn’t destroy it much. Dug down 2021 and build for 2022
Can we use the landscape fabric under the sand? So there are no folds or tape seams? We aren’t using the gorilla pad. Just Home Depot landscape
Do we really need stone dust around the edge? We dug a 2ft slope down to level last year and before install will remove the top inch or two if soft. I’ve heard horrible stuff about stone dust on this site regarding corrosion. The finest stone dust we can find is over a grain of rice at least in size. Any help would be appreciated.
We are setting it on 12x12 pavers dug flush with the dirt next to it. 3 inches of sand inside the pool wall. Vbead liner 27x54 resin bottom cuffs. Ps. The tarp and bricks are covering the site so the winter didn’t destroy it much. Dug down 2021 and build for 2022