Good morning,
I have a 18x36 in ground liner pool with a 9-year-old liner. I pulled my solid cover off about a week ago and was surprised to see only about 6" of water left in the shallow end. Luckily it didn't let go and its finally full and got everything up and running. I don't understand where my water went, it didn't appear to be leaking at time of closing and after filling it doesn't appear to be leaking now. I did a bucket test last night (12-hour test) and saw no loss in the bucket water and no loss in the pool water that I could tell. I have a leak detection company lined up to come out on Wednesday but now I kind of think I should just cancel it and save myself the $600 fee. So....where did my water go? I keep an auto pump on top of the cover all winter long. Last spring when I opened the pool it was low, but I had added water some throughout the winter but didn't do so this winter. I wasn't expecting 13,000 gallons to be gone. I had to add all that water, 4lbs of CYA, 400lbs of salt, and 3 gallons of chlorine to get me going. My 3-year-old RJ 60+ controller keypad took a dump over the winter as did my flow switch...I kind of thought this stuff would have lasted longer.
My hypothesis:
Water evaporates out of the pool and on to the underside of the cover and then the pump slowly sucks it through the cover. Thoughts? The pool was closed for 6 months. Is this normal? This cover is 2 years old and having just a tarp and water bags the year prior, I didn't have this issue. I don't want to have to add 15k gallons of water and all this CYA and salt every spring and it surely isn't good for my old liner to be that low for that long. I was hoping to squeeze a couple more seasons out of my liner, it is getting pretty faded out in areas but overall seems to be ok.
Thanks fellas



I have a 18x36 in ground liner pool with a 9-year-old liner. I pulled my solid cover off about a week ago and was surprised to see only about 6" of water left in the shallow end. Luckily it didn't let go and its finally full and got everything up and running. I don't understand where my water went, it didn't appear to be leaking at time of closing and after filling it doesn't appear to be leaking now. I did a bucket test last night (12-hour test) and saw no loss in the bucket water and no loss in the pool water that I could tell. I have a leak detection company lined up to come out on Wednesday but now I kind of think I should just cancel it and save myself the $600 fee. So....where did my water go? I keep an auto pump on top of the cover all winter long. Last spring when I opened the pool it was low, but I had added water some throughout the winter but didn't do so this winter. I wasn't expecting 13,000 gallons to be gone. I had to add all that water, 4lbs of CYA, 400lbs of salt, and 3 gallons of chlorine to get me going. My 3-year-old RJ 60+ controller keypad took a dump over the winter as did my flow switch...I kind of thought this stuff would have lasted longer.
My hypothesis:
Water evaporates out of the pool and on to the underside of the cover and then the pump slowly sucks it through the cover. Thoughts? The pool was closed for 6 months. Is this normal? This cover is 2 years old and having just a tarp and water bags the year prior, I didn't have this issue. I don't want to have to add 15k gallons of water and all this CYA and salt every spring and it surely isn't good for my old liner to be that low for that long. I was hoping to squeeze a couple more seasons out of my liner, it is getting pretty faded out in areas but overall seems to be ok.
Thanks fellas




Last edited: