Pump won’t turn off

[etherscreen]

I have a 2nd pump to run my features and infloor cleaners. For some reason when i shut the cleaners off tonight the pump still runs sending water down the slide. Then when I turn the patio lights on using ScreenLogic and turn the slide off so must’ve moved the valve. I thought I had all my plugs plugged into the right circuits but obviously this is not the case. Does anyone have any experience troubleshooting where the plugs go into the circuits. When the pool builder closed my pool last year I unplugged three of them which I believe is the slide, the water lights,And I’m not sure what the other circuit is? I do have an in floor cleaner but I’m not sure if that uses a circuit or if it could be my water feature lights?

 

[Jimrahbe]

e,

My guess is that you have one of your relays connected to the wrong connector.. I say that because of the issues you have been adding

Go outside and look to see what button is on...

Is the pump that runs your cleaner a 2-speed pump like your signature says?

Thanks,

Jim R.