- Feb 26, 2013
- 346
- Pool Size
- 10000
- Surface
- Plaster
- Chlorine
- Salt Water Generator
- SWG Type
- Hayward Turbo Cell (T-CELL-5)
I have a Hayward VSP with a Prologic that I control from the AquaConnect app. The app stopped responding last weekend, and the Prologic is throwing a VSP Comm Error. The pump does respond to commands from the Prologic keypad, so the error message is confusing.
I tried power-cycling the Prologic - still throws the error. Also just power-cycled the AquaConnect bridge (the black device that sends wireless signals to the base station), and now the app is throwing a "Base Station Not Responding" error. Before it was just blank. The lights on the bridge are flashing, so it appears to be working.
My normal assumption from these symptoms would be that the base station has crapped out, but the VSP Comm Error is confusing. Any ideas?
Edit: Mods, it might make sense to move this to the automation section.
I tried power-cycling the Prologic - still throws the error. Also just power-cycled the AquaConnect bridge (the black device that sends wireless signals to the base station), and now the app is throwing a "Base Station Not Responding" error. Before it was just blank. The lights on the bridge are flashing, so it appears to be working.
My normal assumption from these symptoms would be that the base station has crapped out, but the VSP Comm Error is confusing. Any ideas?
Edit: Mods, it might make sense to move this to the automation section.
Last edited:
