Is there any way to get the equivalent of a sweeper hose that comes with a pressure side cleaner that would connect to the return ports in my pool plumbed for suction side cleaners? Something that just press fits into the 1" return jet would be fine.
While the pool is not in use, and after the robot has finished it's cycle, which gets only about 75% of the dirt, I was wondering if there is something I could plug into the return jets that would agitate the bottom of the pool so the dirt would suspend and get filtered.
The robot cleaner doesn't do a great job, it cleans fine when it is traveling towards its exhaust, but just leaves track marks when it is traveling away from its exhaust. Part of the problem is the dirt is silt suspended in the air on windy days and settles on the bottom. The standard filter in the robot doesn't trap the silt, so extra fine filters were installed, which alters it's cleaning behavior.
Mark

While the pool is not in use, and after the robot has finished it's cycle, which gets only about 75% of the dirt, I was wondering if there is something I could plug into the return jets that would agitate the bottom of the pool so the dirt would suspend and get filtered.
The robot cleaner doesn't do a great job, it cleans fine when it is traveling towards its exhaust, but just leaves track marks when it is traveling away from its exhaust. Part of the problem is the dirt is silt suspended in the air on windy days and settles on the bottom. The standard filter in the robot doesn't trap the silt, so extra fine filters were installed, which alters it's cleaning behavior.
Mark

Last edited: