Hi everyone.
I'm concerned about my pressure reading. It stays at 20 PSI under all circumstances. (Unless shut off, then zero)
I removed both of my 3/4 return jets.
I have one skimmer, two main drains,
switching between them also has no effect.
I can switch between my two returns and my two water features, no change when I do that either.
Back washing, then rinsing, no effect.
Gone through two brand new gauges.
I wouldn't be concerned about the 20PSI if the PSI would change under conditions in which it should change.
The only thing I haven't done is open my filter to look inside.
My pool, and equipment was installed/finished late September last year.
Hoping that someone can help me out here, or maybe I'm worrying for nothing?
I've edited this post to add that putting my filter on recirculate, does reduce the pressure to 18.5-19 PSI. A drop of 1-1.5 PSI.
Thanks,
Eric
I'm concerned about my pressure reading. It stays at 20 PSI under all circumstances. (Unless shut off, then zero)
I removed both of my 3/4 return jets.
I have one skimmer, two main drains,
switching between them also has no effect.
I can switch between my two returns and my two water features, no change when I do that either.
Back washing, then rinsing, no effect.
Gone through two brand new gauges.
I wouldn't be concerned about the 20PSI if the PSI would change under conditions in which it should change.
The only thing I haven't done is open my filter to look inside.
My pool, and equipment was installed/finished late September last year.
Hoping that someone can help me out here, or maybe I'm worrying for nothing?
I've edited this post to add that putting my filter on recirculate, does reduce the pressure to 18.5-19 PSI. A drop of 1-1.5 PSI.
Thanks,
Eric
Last edited: