Pre pool opening (white water mold)
- Thread starter Badpoolmom
- Start date
Frog cycler system for inground pools. Can I have the hub take it to lowes and match it up or is it something special?
(Maybe when this started leaking is when I started noticing the “air bubble” in the pump basket)
(Maybe when this started leaking is when I started noticing the “air bubble” in the pump basket)
Model #5400 comes up for the unit. See if that # is stamped anywhere
Amazon replacement if so. (I'd bet a paycheck it's proprietary and Lowes won't have it). But this is the exact thing I like the pool store for. Who cares it's $3 more if they not only know which one, but have it in stock *today*
its on the return side after the pump. It's pushing water, not sucking air.
Well that makes me feel better -maybeits on the return side after the pump. It's pushing water, not sucking air.
I found this but didn’t find it helpful . I’ll call the pool store
* 8&9 “knob with o ring”
YA DONT SAY! SMH
* 8&9 “knob with o ring”
YA DONT SAY! SMH
I found a serial number but not model
Ordering Amazon replacement now . Ty
Ordering Amazon replacement now . Ty
We're gonna make you SUPER fun at parties
Guests; *talking about guest things*
BPM : Did you all know that a leak before the pump will suck air, but the same leak after the pump will blow water ?
Guests : *Ooohs and Ahhhs*
I'm like 21% certain it'll go exactly like that.
Oh I’m still talking about wwm at parties . It’s gonna take me awhile to get over that one
It is usually goes something like
Guest * what?! Is this pool safe to be in?!
Me * not to worry grasshoppa I have become master of wwm
Guest * what?! Is this pool safe to be in?!
Me * not to worry grasshoppa I have become master of wwm
Keep your fingers crossed no one brings up algae tho because well… that’s a whole nother story . Master I am not
Good morning .
Looks like I’m slamming on. Lost 2 overnight.
I have guest coming today, and have turned the heater on for the first time in months. Will this affect chemistry in any way?
Looks like I’m slamming on. Lost 2 overnight.
I have guest coming today, and have turned the heater on for the first time in months. Will this affect chemistry in any way?
Nope.
The only thing I got left is to lower the water to get under the cover for cleaning. I'm legit grasping at straws here, but literally every last other inch has been addressed. Several times. Your effort across the board has been exemplary as well.
I am still wiping algae from the skimmer, so it’s coming from somewhere 
However I am not seeing it on the pool floor. I only had the aha moment a few days ago that what I thought was dirt lining the edges of the pool floor, the last week or so must have been algae . As mentioned this is my first battle with algae . So I’ve learned a few things these past weeks lol
Algae is not necessarily green being the biggest one
However I am not seeing it on the pool floor. I only had the aha moment a few days ago that what I thought was dirt lining the edges of the pool floor, the last week or so must have been algae . As mentioned this is my first battle with algae . So I’ve learned a few things these past weeks lol
Algae is not necessarily green being the biggest one
I don’t necessarily see it on the pool surface, but I do see something on the surface of the skimmer water …. Shiny like zillion little particles . Biofilm?
Like broken up lotion or sunscreen kind of look
Like broken up lotion or sunscreen kind of look
Seems it’s really kicked up the last few hours with the heater on. It certainly more visible , but perhaps I’m grasping
Well then. Not much to do then besides keeping the FC up while you wait it out. Maybe it'll burp out some intermittent chunks like this one after a OCLT pass yesterday.
