Hello! We had the pool pad (ground) professionally prepared, but installed the pool ourselves. The pool is a used 27ft 52in metal frame pool. Not intex. We’ve added the liner and some water has been delivered. About 10 in of water. Measure the water levels around the pool and in most areas it’s within 1 inch. However about 48 inches of the northeast side is 2 inch off! The manufacture says over 3 and over is a no go. Really don’t want to tear down and redo bc we’ve put a lot of blood sweat and tears into it! Pictures at this point wouldn’t show much or I would attach. Thanks for any advice even if I don’t wanna hear it. 
