Pool Smart filter making loud buzzing sound

Carlsonn

New member
Jul 28, 2023
4
North Carolina
It was not making this sound last week that I know for a fact but lately its been sunny in North Carolina so I went out today to add water to the pool(this was in the early morning when the pool hasn't turned on yet) since it was below its recommended range. I go back outside a couple hours later to see that the water is at a acceptable level but I hear the pool smart filter making the buzzing sound and I cant find anything online to address this matter or to brush it off. Anyone have any idea what the problem is if any?( I will check if this is still happening tomorrow to make sure it isn't a one time thing)
 

Attachments

  • 364181288_7222957344387324_8299816259130774753_n.jpg
    364181288_7222957344387324_8299816259130774753_n.jpg
    176.3 KB · Views: 9
  • 364196825_1334948250436445_8983830372533287736_n.jpg
    364196825_1334948250436445_8983830372533287736_n.jpg
    412 KB · Views: 12
1690578923573.png

1690579275872.png

Filter is a Hayward Swimclear Model C6060BHMB.

The BHMB means Blue Haven Micro Ban filter.

The replacement cartridge is CX1390REM



Sometimes the part that goes into the cartridge is not tight and it creates a vibration.

1690579670244.png
 
Last edited:
It isn’t doing the buzzing sound anymore and it’s been on for two hours so I’ll message here again if it happens again but I just now added the powder and drained some water cause it was a little to high I suppose to see if that helps out for now. I’ll take apart the filter when it happens again because I need to order the part first because I would need to replace it eventually right? Also what is usually the lifetime of such 2 years? Cause that’s how long I’ve had this pool.
 

 
It isn’t doing the buzzing sound anymore and it’s been on for two hours so I’ll message here again if it happens again but I just now added the powder and drained some water cause it was a little to high I suppose to see if that helps out for now. I’ll take apart the filter when it happens again because I need to order the part first because I would need to replace it eventually right? Also what is usually the lifetime of such 2 years? Cause that’s how long I’ve had this pool.
What powder was added?
 
Thread Status
Hello , This thread has been inactive for over 60 days. New postings here are unlikely to be seen or responded to by other members. For better visibility, consider Starting A New Thread.