I have all pentair equipment with intellicenter. Pool was recently opened and running well except fora bit more air getting in the pump. Came home from work and found pump off, heater and chlorinator all with no power. Tripped the breaker and the Pentair intellicenter came on for a second then back off. Troubleshooted and took off the drive of the pump and found some old smelly water. Dried that out and now intellicenter stays on, but no power to pump, chlorinator or heater. I have had an electrician and pool guy look at it and can't figure it out yet. We had nice sunny weather the day this happened. Any ideas on where to start troubleshooting?
pool equipment ( pump, heater, chlorinator) suddenly not working
- Thread starter jkbees
- Start date
- Jul 21, 2013
- 66,412
- Pool Size
- 35000
- Surface
- Plaster
- Chlorine
- Salt Water Generator
- SWG Type
- Pentair Intellichlor IC-60
Do you have a multimeter and know how to use it?
Show us pictures of the IntelliCenter with the front panel off so we can see the high voltage wiring inside.
Also post pictures of your equipment pad.
We need to understand what devices are attached to which relays and circuit breakers.
What model pump do you have?
Show us pictures of the IntelliCenter with the front panel off so we can see the high voltage wiring inside.
Also post pictures of your equipment pad.
We need to understand what devices are attached to which relays and circuit breakers.
What model pump do you have?