Pool and Spa = two pools?

[SuperMiguel]

I run my spillover at 9AM for 20 minutes to get chlorinated water in it for the day and then at 2pm for 20 minutes to refresh the spa water for the afternoon sun.

Twice a day for 15-20 minutes seems to work well.

Quick question, when setting up timers, do you set it for example:

SpillOver Start: 9:00AM Stop: 9:20AM
Pool Mode Start: 9:21AM Stop: something

So there is a 1 min difference between spillover and pool, which will trigger a priming for 5 min.. Is this the right way? or should you make them Stop and Start at the same time to prevent priming?

 

[ajw22]

You program your filter pump pool mode from 8 AM to 8 PM.

Then you program SPILLOVER for 9AM-9:20 and 2PM-2:20.

Also run your spa blower for 2 minutes one a day, like 1PM-1:02.

The other modes override POOL mode and then POOL mode resumes when the other mode ends.