Polaris robot ultra fine filter is amazing!

ParB

Gold Supporter
Silver Supporter
Bronze Supporter
Apr 26, 2020
163
SF Bay area (silicon valley)
I have had my Polaris 965IQ robot for about a month. I'm very happy with it. It replaced a pressure side Polaris 280 that was years old but well maintained.
I thought my Polaris 965 did a good job of cleaning, it looked really clean to me and far better than what my 280 could do. But someone on the forum told me to get the ultrafine sand and silt filter. I just got it a few days ago and yesterday I ran the robot with it.

For the record, the pool looked clean to the eye. Sparkling clean.
After a smart cycle and a floor cycle (both run sequentially as I wanted a deep clean) I opened up the basket and found this...
PXL_20210703_225939996.jpg

Unbelievable how much silt I had in the pool..! I use an automatic cover and it's closed at nights and when it's windy (to prevent leaves from landing in the pool).
This filter is amazing! Best buy ever!
 
Yep I have the ultra-fine and it is phenomenal. Be careful though mine got a little too full and blew one of the edges out about an inch. I run the regular filter first and then go a 2nd time around just the bottom with the fine filter.

After 3 seasons or so your filter will start becoming hard to get in because the bottom will warp. When it does, this is what you need:

 
Thread Status
Hello , This thread has been inactive for over 60 days. New postings here are unlikely to be seen or responded to by other members. For better visibility, consider Starting A New Thread.