I have a Polaris P965iQ. It is about 2 years old. When I start it it will run for about 3 or 4 minutes and then it stops. It does not show any error codes. I have cleaned it out several times and I have unplugged the power for an extended period several times and nothing changes. Any suggestions?
Polaris P965iQ problem
- Thread starter mm6453
- Start date
- Jul 21, 2013
- 65,184
- Pool Size
- 35000
- Surface
- Plaster
- Chlorine
- Salt Water Generator
- SWG Type
- Pentair Intellichlor IC-60
Welcome to TFP.
Not a lot of discussion about the Polaris P965iQ. Let’s see who comes out of hiding.
Not a lot of discussion about the Polaris P965iQ. Let’s see who comes out of hiding.
Are you certain your AC power is working correctly. Can you plug the controller into a different power outlet and see if the problem remains?
- Jun 7, 2017
- 9,975
- Pool Size
- 29000
- Surface
- Plaster
- Chlorine
- Salt Water Generator
- SWG Type
- Jandy Aquapure 1400
It's the cable that attaches it to the power supply. Unscrew it and reseat everything.
- Jul 21, 2013
- 65,184
- Pool Size
- 35000
- Surface
- Plaster
- Chlorine
- Salt Water Generator
- SWG Type
- Pentair Intellichlor IC-60